Panasonic KX-TDA0484 Getting Started

Also see for KX-TDA0480: Getting started guide Installation manual Getting started

Contents

Panasonic KX-TDA0484 Getting Started Manual pdf 39 page image

4.2 Programming the VoIP Gateway Card in the Los Angeles OfficeGetting Started 394.2.8 Confirming the IP Address AssignmentAfter programming of the VoIP Gateway Card is finished, try to access the card with the newIP addressing information. If you can connect to the card without problems, the card can beplaced on the LAN for VoIP operations (see "2.2.2 Connection to the LAN" or "3.2.2 Connectionto the LAN").Follow the procedure below, referring to "4.1.1 Preparing the PC" and "4.2.1 Starting the IP-GW4 Maintenance Utility".1. Set the IP address settings of the PC to the following values:• IP address: 200.45.11.100• Subnet Mask address: 255.255.255.02. Start Internet Explorer from the Start menu.3. In the Address box of Internet Explorer, type http://200.45.11.35 (the new IP address ofthe card).4. Press the ENTER key on the keyboard.If you can log in, then the card has been successfully programmed.After you have confirmed that the card has been successfully programmed, it is stronglyrecommended that you download the configuration data from the card and save it on your PCfor backup and archive purposes.The procedure for downloading the configuration data is provided in "2.4.2 Download ofConfiguration Data" of the VoIP Gateway Card Programming Guide.