9.6 DISA [6]200 Programming Manual9.6.2 Automated Attendant [6-1] AA dialAA dialThe Direct Inward System Access (DISA) Automated Attendant (AA) Service supports up to 3 levels of DISAoutgoing messages (OGMs). These settings are available only when With AA is selected in DISA IncomingCall Dial Mode on the 9.6.1 Automated Attendant [6-1] screen.In the AA dial dialog box, the title is displayed as follows:First level: AA dial "X"Second level: AA dial "X-Y"Third level: AA dial "X-Y-Z"(X, Y, Z: 0–9)Depending on the type of destination selected, it may also be necessary to select a specific destination(Extension/Extension Group). When you select 2-level AA or 3-level AA as the destination, the displayshows how to record and playback through personal programming from the telephone. After you click OK,a minus sign (-) is displayed before the AA icon, and the possible sub-destinations 0 [ ]–9 [ ] of the followinglevel are displayed. When you click the minus sign (-), the sign changes back to the plus sign (+), and thelist of sub-destinations is closed. In Interactive mode, when the selected DISA OGM has already beenrecorded, a horn graphic is displayed after the name of the menu option.When you change the type of a destination from 2–level AA or 3–level AA to another setting, any associatedDISA OGM will also be cleared. In addition, any items within the AA menu being removed will also beremoved.DefaultAll AA numbers: — (Not stored)Value RangeExtension (Jack 01–24 [Extension no. and name specified in Ext. no. and Name on the 9.1.3 NumberingPlan [1-3] screen]), Extension Group (Extension Group 1–8), 2- or 3-level AA [not available to select from3–level AA], Not StoredProgramming Manual References[501] DISA Built-in AA[540-549] 3-level AA Assignment9.1.3 Numbering Plan [1-3]—Ext. no., Name9.6.1 Automated Attendant [6-1]—DISA Incoming Call Dial Mode
