2.2 PT Programming—ProceduresProgramming Manual 192. To avoid unauthorized access and possible fraudulent dialing, maintain the secrecy of thepassword.3. We strongly recommend that you change the default password value to something else for reasonsof system security. It is best to use a password of 7 digits.4. Please change the password periodically.5. If a system password is forgotten, it can be found by loading a backup of the system data into aPC, and checking the password using the KX-TA Maintenance Console software. If you do not havea backup of the system data, you must reset the PBX to its factory defaults and reprogram it.Therefore, we strongly recommend maintaining a backup of the system data. For more informationon how to back up the system data, refer to the on-line help that appears by selecting the Helpmenu during PC programming. However, as system passwords can be extracted from backupcopies of the system data file, do not allow unauthorized access to these files.NotesThis PBX has only one system password. It can be changed by either PT programming or PCprogramming. For this reason, the password can consist of numerals only.Programming Manual References2.1 PT Programming—Instructions3.2 PC ProgrammingFeature Manual References1.1.99 PC Programming1.1.103 PT Programming[003] DSS Console Jack AssignmentSelects the number of the extension jack that the DSS Console is connected to.Conditions• To delete (disable) an extension jack number, press CLEAR in the extension jack number step.• The same jack number cannot be assigned to 2 DSS Consoles.• Do not assign extension jack 01 (manager extension) as the DSS Console jack.• The extension jack number preassigned as a paired telephone in [004] Console Paired Telephoneshould not be assigned in this program.Programming Manual References[004] Console Paired TelephoneFeature Manual References1.1.54 Extension Jack Configuration0 0 3 NEXT DSS console no. extension jack no. STORE END(1…2) (02…24/ Disable)NEXT PREVorTo continue
