Panasonic KX-TA824 Programming Manual

Also see for KX-TA824: User guide User guide Operating manual Installation manual Programming manual

Contents

Panasonic KX-TA824 Programming Manual Manual pdf 77 page image

2.2 PT Programming—ProceduresProgramming Manual 77[915] Caller ID ChecksumEnables or disables selection of the checksum mode. Normally, it should not be necessary to change thedefault setting.Feature Manual References1.1.28 Call Waiting Caller ID1.1.30 Caller ID[963] Call Forwarding SelectionEnables the PBX to forward the calls received on outside (CO) lines programmed as "Normal" in [414-416]CO Line Mode—Day/Night/Lunch. If this program is disabled, outside (CO) line calls cannot be forwardedeven if the extension user has set the FWD feature.Conditions• This program also functions for outside (CO) line calls via the DISA Intercept Routing feature, andwhen DISA calls are received by a DISA ring group.Programming Manual References[414-416] CO Line Mode—Day/Night/LunchFeature Manual References1.1.11 Call Forwarding (FWD)—All Calls1.1.12 Call Forwarding (FWD)—Busy/No Answer1.1.13 Call Forwarding (FWD)—Follow Me[966] TRS Check after AnsweringSpecifies whether the PBX checks DTMF signals when answering calls or not.9 1 5 NEXT SELECT STORE END( Enable/Disable)9 6 3 NEXT extension jack no. STORE END(01…24/ )SELECTSELECTNEXT PREVorTo continueTo continue(Enable/Disable)9 6 6 NEXT SELECT STORE END(Enable/ Disable)