2.2 PT Programming—Procedures64 Programming Manual[627] SLT Ring Wait Time for New CallSelects the length of time the ringing for a call is delayed when the call follows immediately after the previousunanswered call. When receiving 2 calls in quick succession, for example, when a call waiting in a queue isdirected to an extension immediately after the previous call stops ringing, some SLTs require a pause, afterthe first call stops ringing, to receive the second call's Caller ID information.Feature Manual References1.1.30 Caller ID[628] SLT Caller IDEnables the PBX to send Caller ID information to an SLT.Feature Manual References1.1.30 Caller ID[629] SLT Fixed Bell PatternSelects the fixed ring tone pattern of an SLT for incoming calls (intercom calls and outside (CO) line calls).The same pattern as used by your telephone company may be selected.Feature Manual References1.1.30 Caller ID1.1.108 Ring Tone Pattern Selection6 2 7 NEXT extension jack no. name* STORE END(01…24/ )SELECTSELECTNEXT PREVorTo continueTo continue(0…15 s)0 s6 2 8 NEXT extension jack no. name* STORE END(01…24/ )SELECTSELECTNEXT PREVorTo continueTo continue(Enable/Disable)6 2 9 NEXT extension jack no. name* STORE END(01…24/ )SELECTSELECTNEXT PREVorTo continueTo continue( Disable/Single/Double)
