Telephone Features 3-853.2 Telephone Features OOutward Dialing, Line Access — SUMMARYAn outside (CO) line can be accessed in the following ways.Conditions• After dialing the feature number or pressing the CO button, you will hear one of thefollowing tones.Dial tone: Indicates an idle outside (CO) line is accessed.— is shown on a PT display. (x: outside (CO) linenumber)Busy tone: Indicates the selected outside (CO) line is busy.— is shown on a PT display.Reorder tone:1) Indicates the outside (CO) line you have attempted to access is not assigned.— is shown on a PT display.2) Indicates access to outside (CO) lines is denied.— is shown on a PT display.• may be displayed on a PT display and a reorder tone maysound due to the following.— The extension has been locked by the owner (Electronic Station Lockout) or theoperator/manager (Remote Station Lock Control).— The extension is restricted by the account code mode, “Verified - All” or“Verified - Toll”.— The extension is restricted from making toll calls (Toll Restriction).• The CO button assignment on your telephone can be re-arranged as required. Refer tothe “Flexible Button Assignment” in Station Programming (Section 2).• An outside (CO) line which is not assigned to a CO button cannot be dialed.PTPTRestrictedRestrictedCO Not AssignedCO in UseCO xLine Access, AutomaticLine Access, IndividualLine Access, Outside (CO)Line GroupDial the feature number (9).Press a Single-CO (S-CO) button.Dial the feature number (8) and an outside(CO) line group number (1-6).orPress a Group-CO (G-CO) button
