Telephone Features 3-833.2 Telephone Features OConditions• The destination numbers are stored through Station Programming.• You may press a CO button to select a desired outside (CO) line before pressing theOne-Touch Dialing button.• “Speed Dialing”, “One-Touch Dialing” and manual dialing can be used together.• You can store a number consisting of twenty-five digits or more by dividing and storingit into two One-Touch Dialing buttons.• The telephone number dialed will be displayed on the LCD. Use the FWD/DND (→)or CONF (←) button to scroll the display to either side.• A pause is automatically entered after the stored line access code, 9 or 81 through 86,when dialing.• To confirm the current status of the button, press the button while on-hook.Programming Reference• Station Programming (Section 2)Flexible Button Assignment — One-Touch Dialing ButtonPTPTPTPTPTPTPTOne-Touch DialingAllows you to call a number or access a system feature with the touch of a button. This isdone by storing an extension number, telephone number or feature number (up totwenty-four digits) in a One-Touch Dialing button.DialingPTLift the handset or pressSP-PHONE/MONITOR.Press the flexible button assignedas a One-Touch Dialing button.
