4-128 System Programming4.2 System ProgrammingSystem Data Dump804Description Starts or stops printing the assigned data. All or a specific area ofcurrent programmed data is printed out. The areas are as follows.All Para: All dataSystem Para: All data except the following programs.CO Para: Programmed data of [400]–[403], [405]–[423] and[900].Ext Para: Programmed data of [102], [516], [600]–[620], and[904] and [905] if a proprietary telephone isconnected. The assigned data on the PF(Programmable Feature) buttons and CO buttons arealso printed out.Programmed data of [102], [516] and [600]–[612] ifa single line telephone is connected. The storedPersonal Speed Dialing numbers are also printedout.DSS Para: Data assigned to DSS buttons and PF buttons on theDSS Consoles.Speed Dial: Programmed data of [001]Stop Output: Stops printing.Selection All Para / System Para / CO Para + outside (CO) line number:1 – 6, ( = all outside (CO) lines) /Ext Para + jack number: 01 – 24, ( = all jacks) /DSS Para + DSS Console number: 1 or 2, ( = all DSSConsoles) / Speed Dial / Stop OutputDefault Not applicable.Programming 1. Enter 804.Display: System Data Dump2. Press NEXT.Display: Menu:All Para3. Keep pressing SELECT until the desired selection isdisplayed.4. Press STORE.5. If CO Para, Ext Para or DSS Para is selected, enter anoutside (CO) line, jack or DSS Console number.6. Press STORE.7. Press END.
