Panasonic KX-TA624 Installation Manual

Also see for KX-TA624: User guide Feature manual Programming manual User guide Manual

Contents

Panasonic KX-TA624 Installation Manual Manual pdf 277 page image

4.2 System ProgrammingPulse Speed Selection402System Programming 4-63Description An outside (CO) line set for pulse or call blocking mode in program[401] “Dial Mode” can have two pulse rates, 10 pps (low) and20 pps (high). This program sets the pulse speed for each outside(CO) line which has set the pulse or call blocking mode.Selection • Outside (CO) line number: 1 – 6, ( = all outside (CO) lines)• Low Speed (10 pps) / High Speed (20 pps)Default All outside (CO) lines – Low SpeedProgramming 1. Enter 402.Display: Pulse Speed2. Press NEXT.Display: CO NO? →3. Enter an outside (CO) line number.Pressing NEXT also can enter outside (CO) line number 1.Display example: CO 1:Low Speed4. Keep pressing SELECT until the desired selection isdisplayed.5. Press STORE.6. To program another outside (CO) line, press NEXT orPREV, or SELECT and enter the desired outside (CO) linenumber.7. Repeat steps 4 through 6.8. Press END.Conditions • To assign all outside (CO) lines to the same selection, press the keyin step 3. In this case, the display will show: CO :Mixed.• The required pulse speed is determined by the outside (CO) or HostPBX line.Feature Reference Section 3, FeaturesDial Type Selection