Download Timing ExplanationWhen directed When a setting needs to be changed immediately, units can be directedto download the configuration files by sending them a NOTIFY messagethat includes a special event from the SIP server.• In the configuration file:– Specify the special event text in "CFG_RESYNC_FROM_SIP".• In the Web user interface:– Click the [Maintenance] tab, click [Provisioning Maintenance],and then enter the special event text in [Header Value for ResyncEvent].Generally, "check-sync" or "resync" is set as the special event text.2.2.5 Provisioning Server Setting ExampleThis section gives an example of how to set up the units and provisioning server when configuring 2 unitswith configuration files. The standard configuration files and the master configuration file are used in thisexample.ConditionsItem Description/SettingProvisioning server FQDN prov.example.comUnits’ MAC addresses • 0080F0111111• 0080F0222222URL of the configuration files Configure the following 2 settings either by pre-provisioning or throughthe Web user interface. The values of both settings must be the same.• CFG_STANDARD_FILE_PATH="http://prov.example.com/Panasonic/Config{MAC}.cfg"• CFG_MASTER_FILE_PATH="http://prov.example.com/Panasonic/ConfigCommon.cfg"Directory on the provisioningserver containing theconfiguration filesCreate the "Panasonic" directory just under the HTTP root directory ofthe provisioning server.File name of configurationfilesStore the following configuration files in the "Panasonic" directory.• Contains the common settings for the 2 units:– ConfigCommon.cfg• Contains the settings unique to each unit:– Config0080F0111111.cfg– Config0080F0222222.cfgTo set up the provisioning server1. Connect the units to the network, and turn them on.a. The unit with the MAC address 0080F0111111 accesses the following URLs:http://prov.example.com/Panasonic/ConfigCommon.cfghttp://prov.example.com/Panasonic/Config0080F0111111.cfg2.2.5 Provisioning Server Setting Example36 Administrator Guide Document Version 2016-05
