Panasonic KX-HDV430 Administrator's Manual

Also see for KX-HDV430: Guide Operating instructions Supplement manual Operating instructions Quick start guide

Contents

Panasonic KX-HDV430 Administrator's Manual Manual pdf 257 page image

Value Range 1 or 2 (× 10 ms)Note• This setting is subject to the following conditions:– This value must be less than or equal to "NOM_DELAY"– This value must be less than "MAX_DELAY"– "MAX_DELAY" must be greater than "NOM_DELAY"Default Value 2NOM_DELAY_nParameter Name Example NOM_DELAY_1, NOM_DELAY_2, …, NOM_DELAY_16Value Format INTEGERDescription Specifies the initial delay, in 10-millisecond units, of the jitter buffer.Value Range 1–7 (× 10 ms)Note• This setting is subject to the following conditions:– This value must be greater than or equal to "MIN_DELAY"– This value must be less than "MAX_DELAY"Default Value 1RTP_PORT_MINValue Format INTEGERDescription Specifies the lowest port number that the unit will use for RTPpackets.Value Range 1024–59598 (only even)Default Value 16000Web User Interface Reference Minimum RTP Port NumberRTP_PORT_MAXValue Format INTEGERDescription Specifies the highest port number that the unit will use for RTPpackets.Value Range 1424–59998 (only even)Default Value 20000Web User Interface Reference Maximum RTP Port NumberRTP_PTIMEValue Format INTEGERDescription Specifies the interval, in milliseconds, between transmissions of RTPpackets.5.3.26 RTP/RTCP/RTCP-XR SettingsDocument Version 2016-05 Administrator Guide 257