Printed in Japan PSQX2811XB KK1102RM3043 (CE)Getting StartedModel No. KX-HCM230Please read the Operating Instructions for the details.Keep this leaflet for the future reference.The suffix of each model number is omitted.Included AccessoriesNetwork CameraAC Adaptor AC cordPutties 1 set(4 pcs.)SunshadeSelf BondingtapeScrews forFlexible StandFlexible StandRubber CapConnector CoverIf any items are missing, please contact the dealer immediately.NoteMain Unit SetupCD-ROMScrews 5 pcs.3 pcs.Network Camera Configuration TypeThe Network Camera can be connected over the LAN/Intranet and the Internet. Please select fromthe four Network Camera configuration types. Network parameters differ depending on the Network Cameraconfiguration type.Network Camera can be installed on the LAN/Intranet.[Type 1] LAN/Intranet Connection with anEthernet ® Switching HubLAN/IntranetEthernet switching hub*1*1 Network traffic can be smooth by using the Ethernet switchinghub.Network Camera can be accessed from the Internet.The broadband router needs Port Forwarding (IP Masquerade)feature on Page 32 in the Operating Instructions.[Type 2] Internet Connection with aBroadband RouterModem BroadbandRouterCATVxDSLOptical cableInternet WAN LANNetwork Camera can be installed alone without PC on thenetwork. When you set up the Network Camera in [Type 3],please connect the Network Camera temporarily in [Type 1],[Type 2] or [Type 4].[Type 3] Internet Direct Connectionwith a ModemMost of the xDSL services use PPPoE. Network Cameradoes not support PPPoE. If the Internet connectionrequires PPPoE, please connect with the router supportingPPPoE like [Type 2].NoteModemInternetNetwork Camera can be installed with the PC directly.[Type 4] Direct Connection with a PCPlease use Category 5 cross cable when connecting directlywith the cable to the PC.NoteCategory 5 cross cablePSQX2811XB.book 1 ページ 2003年5月30日 金曜日 午後4時38分