Panasonic BB-HCM403A Getting Started

Also see for BB-HCM403A: Installation guide Operating instructions Product catalog Installation guide

Panasonic BB-HCM403A Getting Started Manual pdf 1 page image

Getting StartedNetwork CameraModel No. BB-HCM403A(PoE Ready)Connect the Ethernet cable (customer-provided) to the camera.Noteï Your PoE hub must be connected to the router. Refer to the manuals of the PoE hub for the instructions of the connection. Additionally, these instructions assume your PC isalready connected to the Internet and your network includes a router that is UPnP ô (Universal Plug and Play) compliant.Connect the Ethernet cable (customer-provided) to your PoE hub.ï If the camera's indicator does not light green, see pages 5-6 of the Troubleshooting on the CD-ROM.ï A noise can be heard during tilt operation. This is normal.Noteï Use a 4-pair UTP/STP cable.ï Do not use a relay connector or a hub between the camera and the PoE hub. Thesedevices may disturb the data or electricity transmission.ï If the PoE hub has indicators, the indicator lights on as shown in table below.ï If the PoE hub is turned off or power supply is temporarily cut off by the disconnectionof the Ethernet cable, it may take time for the PoE hub's indicators to light green.ï The indicator display differs depending on manufacturers, refer to the manuals of thePoE hub.Ethernet (LAN) portA "straight" Cat5 Ethernet cable(customer-provided)To your PoE hubEthernetportsTo the power supplyA "straight" Cat5 Ethernet cable(customer-provided)To your routerTo the cameraIndicatorLINKPoEDescriptionTurns on when the data is transmitted from the camera.Turns on when the electricity is supplied to the camera.© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.PQQX15557ZA KK0606JT0Please read the Important Information before using.Complete Operating Instructions are included on theenclosed CD-ROM.ï This Getting Started manual explains how to connect and set up thecamera.ï Refer to the Operating Instructions on the CD-ROM for details regardingthe camera's features.ï See Troubleshooting manual on the CD-ROM if you cannot complete thesetup.ï Refer to the Installation Guide for mounting.Trademarksï Adobe, Acrobat and Reader are either registered trademarks or trademarks ofAdobe Systems Incorporated in the United States and/or other countries.ï Microsoft, Windows and ActiveX are either registered trademarks or trademarks ofMicrosoft Corporation in the United States and/or other countries.ï This software is based in part on the work of the Independent JPEG Group.ï Screen shots reprinted with permission from Microsoft Corporation.ï All other trademarks identified herein are the property of their respective owners.Abbreviationsï UPnP is the abbreviation for "Universal Plug and Play".ï "Network Camera" is called "Camera" in this manual.ï "Setup CD-ROM" is called "CD-ROM" in this manual.1. Connect the camera, and turn the camera on.Connect the camera to your PoE (Power over Ethernet) hub using a "straight" Cat5 Ethernet cable (customer-provided) to set up the camera.ï Before you begin the installation, the UPnPô feature in your router needs to be enabled. Usually, the default setting disables this feature. For more info, please visit,http://panasonic.co.jp/pcc/products/en/netwkcam/ or contact your router's manufacturer.Indoor Ceiling Use OnlyPoE User: See below.AC Adaptor (Model No. BB-HCA2A: Option) User: Go to page 2.PoE User

/ 4

Related manuals for Panasonic BB-HCM403A