Convenient functionsVQT3C8188Other SettingsWhen black bars are shown at the top, bottom, left,and right sides of the screen, you can enlarge theimage to fill the screen.1 Press [OPTION].2 Select “Aspect”, then press [OK].3 Select the item, then press [OK].≥ This function does not work when watching 3Dprogramme or playing back 3D title or 3D photo.≥ It may also be adjusted using the screen mode of the TVetc.≥ The screen mode is switched to “Normal” in the followingsituations:– when you change the channel– when you start or end the playback of a title– when the unit is turned off or on≥ [BD-V] [DVD-V] “Side cut” does not have any effect.≥ When “TV Aspect” (> 80) is set to “4:3” or “Letterbox”, the“Zoom” effect is disabled.The TV can be operated from the TV operation areaof the remote control.Perform the setting if you cannot operate the TV withthe buttons in the TV operation area.1 While pressing [Í TV], enter the code(> 89) with the number buttons.2 Point the remote control at the TV.Test by turning on the TV and changingchannels.≥Repeat the procedure until you find the codethat allows correct operation.≥If the brand of your TV is not listed or the codenumber is invalid for the TV, this remotecontrol is not compatible with your TV.≥ If your TV brand has more than one code listed, select theone that allows correct operation.Switching the aspect ratio of thescreenNormal Normal outputSide cut The black bars on the right and leftsides of the 16:9 image disappearand the image is enlarged.Zoom The black bars on the top and bottomsides of the 4:3 image disappear andthe image is enlarged.TV operation settingCHPAGECHAVTVDRIVESELECTVOL2abc1 3defINPUTTV operation area
