Convenient functionsVQT3C8176Changing the unit’s settings (Setup)∫ Signal ConditionYou can check the quality and strength of signals.Press [W X CH] to select the channel.Signal QualityRed bar: The signal quality is bad.Yellow bar: The signal quality is poor.Green bar: The signal quality is good.Signal Strength0: Signal strength is 0%.10: Signal strength is 100%.≥When the signal is too strong (red bar), reduce thesignal amplification at your aerial.∫ New Channel MessageSet whether to obtain the information automaticallywhen a new digital channel is added.∫ Child LockYou can restrict the viewing programmes unsuitableto children.You can lock each channel.PIN is required to change. (> 74)1 Select the channel to lock.2 Press [OK].is displayed.≥Press [OK] again to cancel.≥“Green”: Lock all channels.≥“Yellow”: Unlock all channels.∫ Preferred Multi Audio¾ Multi AudioChoose the audio language for broadcast. If theselected language is not available, then theoriginal language will be selected.¾ Audio DescriptionSelect whether the Audio Description is set to beactive or not.∫ Preferred SubtitlesChoose the subtitle language for broadcast. If theselected language is not available, then the originallanguage will be selected.≥ After performing “Update Channel List” or “Manual Tuning”if the channel number has already been assigned, channelnumber for the newly tuned channel will be assigned from800ch onward.Channel NameDVB Signal ConditionRETURNChannel UpChannel DownSignal StrengthSignal QualityParameter [CH ] MHzNetwork Name0 100 10Child Lock ListUnlock allLock allRETURNLockSelectName Input Type Lock10 DVBDVBDVBDVBDVBDVBDVBDVBFree TVFree TVFree TVFree TVFree TVFree TVFree TVFree TV11121316202328Page upPage down CH≥ When “Dolby D / Dolby D + / Dolby TrueHD”,“MPEG” or “HE-AAC” is set to “Bitstream” or“Bitstream (Dolby D)”, the Audio Description may notwork. Set them to “PCM” (> 79, Digital AudioOutput).TuningPreferred Multi AudioPreferred Multi AudioMulti AudioAudio Description