Panasonic Diga DMR-PWT500 Operating Instructions Manual

Also see for Diga DMR-PWT500: Operating instructions

Contents

Convenient functionsVQT3C8184Changing the unit’s settings (Setup)∫ Standby Settings¾ Power Save in Standby≥This function cannot be enabled when theDLNA function is enabled in “Home Network( DLNA ) Server function”. (> 83)≥The setting may be changed to “Off”automatically when the setting for videocommunication is changed. (> 65)¾ Automatic StandbySet the time to turn the unit to standby modeautomatically.After the unit has finished operating, the unit willbe turned to standby mode once the set time haspassed.≥When “REWIND LIVE TV” is set to “On” (> 77),“Off” cannot be selected.¾ Automatic Standby after OTRIf “On” is selected, this unit is turned to standbymode when it is not operated for approximately5 minutes after completing “Automatic Stop” or“Recording Time” (> 29).¾ Automatic Standby after CopyIf “On” is selected, this unit is turned to standbymode when it is not operated for approximately5 minutes after completing copy. (> 63, 64)¾ RF OUT ( Aerial Signal )Set whether to output the aerial signal or not fromRF OUT while in standby mode (when “PowerSave in Standby” is activated).≥If “On” is selected, the aerial signal is outputfrom this unit.∫ Remote ControlChange the remote control code on the main unit andthe remote control if you place other Panasonicproducts close together.≥Use “Set Code 1”, the factory set code, undernormal circumstances.1 Select the code, then press [OK].2 While pressing [OK], press and hold the numberbutton ([1] to [6]) for more than 5 seconds.3 Press and hold [OK] for more than 5 seconds.4 Press [OK].≥Operation is possible only with Panasonic remotecontrols with “IR6” printed at the bottom when theremote control code of this unit is set to “SetCode 4”, “Set Code 5” or “Set Code 6”.OthersOn It will go into the “Power Save inStandby” mode.OnTimer“Power Save in Standby” is activatedwhen the set time comes.≥If the clock has not been set, “PowerSave in Standby” is activated at allhours.Off It is possible to start quickly from thestandby mode. (Quick Start mode)SetupOthersOthersStandby Settings EnlgishRemote ControlClockPIN EntrySystem UpdateSystem InformationDivX RegistrationInitializeOwner IDOthersStandby Settings EnlgishStandby SettingsPower Save in Standby EnlgishAutomatic StandbyAutomatic Standby after OTRAutomatic Standby after CopyRF OUT ( Aerial Signal )BLU-RAY DISC PLAYER/HDD RECORDER IR6BLU-RAY DISC PLAYER/HDD RECORDER IR6IR6