Panasonic Diga DMR-BWT735 Operating Instructions Manual

Contents

Convenient functionsVQT4W6894Changing the unit’s settings (Setup)Remote ControlChange the remote control code on the main unitand the remote control if you place otherPanasonic products close together.• Use “BD 1”, the factory set code, under normalcircumstances.1 Select the code, then press [OK].2 While pressing [OK], press and hold thenumber button ([1] to [6]) for more than5 seconds.3 Press and hold [OK] for more than 5 seconds.4 Press [OK].ClockIf the time is not set correctly, use the settingslisted in the method below.• AutomaticThis unit usually obtains time and dateinformation from digital broadcasts.• Time ZoneWhen the time is not correct, set “Time Zone”.(GMT - 6 to + 6)• Manual Setting1 Select “Off” of “Automatic”, then press [OK].2 Select the item you want to change.3 Change the setting.4 Press [OK] when you have finished thesettings.Owner IDIn order to prevent another person from using thisunit if it is stolen, you can set a PIN and inputyour personal information (NAME, HOUSE NO,POSTCODE).Once the PIN has been set, you cannot returnto the factory preset. Make sure not to forgetthis.PIN EntryYou can set/change the PIN for parental control.1 Enter your 4-digit PIN with the numberbuttons.2 Enter the new 4-digit PIN with the numberbuttons.• Make a note of PIN in case you forget it.e.g.,3 Press [OK].OKRemember the PIN.PIN Entry0 0 0 0