Copying videoVQT4W6850Copying titlesCopying videoTo register the external HDD (USB HDD)Refer to “Registering the USB HDD”. (> 77)To copy HD Video (AVCHD) to the DVD-R inHigh DefinitionRefer to “Copying HD Video (AVCHD) to theDVD-R in High Definition”. (> 57)Release the disc protectionRefer to “Disc Protection”. (> 74)• If you wish to choose the audio language, select thelanguage from “Multi Audio” of “Preferred Multi Audio”before copying (> 85).• Simultaneous operation is not possible while copying withfinalising or creating Top Menu. However, the titles on theHDD can be played back while high speed copying withoutfinalising or creating Top Menu.§1 “For recorded titles” only§2 The title in the source media will be deleted.§3 The recording mode cannot be changed.1 Insert or connect the media.2 Press [DRIVE SELECT] to select “HDD”,then press [DIRECT NAVIGATOR].• If the DIRECT NAVIGATOR screen ofphoto or music is displayed, press the redbutton, then select “VIDEO”.3 Select the title, then press the yellowbutton.A check mark is displayed. Repeat thisstep.• Press the yellow button again to cancel.4 Press the blue button.5 Set the copy direction, then press [OK].6 Select “Yes”, then press [OK].• If you select “No”, you can change theselection. (> 51)§1, 2, 3§1Start TimeProg.Type:Rec TimeChannel Date Title NameMovie9:0004/1004/1029/1029/107 Set other settings, then press [OK].e.g.,(> 51, Setting the copying options)8 Select “Yes”, then press [OK].Standby status can be changed if required.Please press OK to start copying.OKRETURNAutomatic Standby after Copy Off
