Convenient functionsVQT4C6990Changing the unit’s settingsIP Address / DNS SettingsCheck the connection of the network or setthe IP address and DNS.• Press [OK] to show the respective setting.• If you set “IP Address”, “Subnet Mask” and“Gateway Address” individually, make theirsettings after setting “IP AddressAuto-assignment” to “Off”.When the router’s DHCP server function isnot activated, check the numbers of otherconnected devices such as personalcomputers, then assign a number differentfrom those of other devices for the “IPAddress” and assign the same number for“Subnet Mask” and “Gateway Address”.Proxy Server SettingsCheck and set the connection to the Proxyserver.• Press [OK] to show the respective setting.Network Service SettingsLockYou can restrict using VIERA Connect.• PIN is required to change. (> 80)Automatic Volume ControlVolume is adjusted automatically to thestandard volume while using VIERAConnect.• Depending on contents, this function willnot work.• Select “Off” when the audio is warped.Home Network SettingsYou can set the DLNA (Server) function.(> 67)Home Network functionYou can switch between enable/disable ofthe DLNA (Server) and DMR (MediaRenderer) function.• If “On” is selected, “Power Save inStandby” is fixed to “Off”. (> 91)Setting device nameIt is also possible to change the name ofthis unit on the network.• Select from a preset listSelect the preset name, then press[OK].• Create nameEnter the name.Refer to “Entering text”. (> 95)Registration type for remote devices• Automatic:All connected devices on the samenetwork can access this unit.• Manual:Only registered devices can access thisunit.
