65RQT9430L/MONO - AUDIO- RVIDEOS VIDEOAV3 INDV INConnect to Audio/Video output terminals.Other video equipmentDV cable(IEEE 1394, 4-pin) S VideocableÚ Audio/VideocableThis unitÚ The S VIDEO terminal achieves a more vivid picture than theVIDEO terminal.If the audio output of the external device is monaural, connect toL/MONO on the AV3 input terminals at the front.If DV cable is connected, the S Video and Audio/Video cable arenot required.Recording from a VCR, etc.HDDPreparation:Press [DRIVE SELECT] to select the HDD drive.When the output signal from the external device isNTSC, change the “TV System” to “NTSC” in theSetup menu (➔ 104).••a few times to select theinput where your external deviceis connected, thenSelect “AV3” for connection with S Video orAudio/Video cable.Select “DV” for connection with DV cable.a few times to select therecording mode.DR, HG, HX, HE, HL, FR mode cannot beselected.Start play on the external device.at the point you want tostart recording.–––••TipsTo skip unwanted partsPress [h] to pause recording. (Press again to restart recording.)To stop recordingPress [g].The confirmation screen appears. Press [OK].NotesWhen timer recording starts while recording from an externaldevice, timer recording takes priority. Recording from the externaldevice stops:When a timer recording from an external device starts.When another timer recording using this unit’s tuner starts.If video is copied from another piece of equipment to this unit, thenthe video quality will be degraded.Almost all videos and DVD-Video on sale have been treated toprevent illegal copying. Any software that has been so treatedcannot be recorded using this unit.During EXT LINK standby mode or recording, you cannot press[INPUT SELECT] to select external input other than AV2.•––•••Recording from an External DeviceWith OtherEquipment
