Panasonic Diga DMR-BS750EB Operating Instructions Manual

Contents

123RQT9430General Issues PowerPageNo power.The unit does not turn on pressing[^].Insert the AC mains lead securely into a known active household mainssocket.Linked timer recordings with external equipment is in recording standby(“EXT-L” on the unit’s display blinks when [^] is pressed). Press [EXT LINK] tocancel the recording standby.••10, 1164The unit switches to standbymode.One of the unit’s safety devices is activated. Press [8] on the main unit toturn the unit on.• −The unit is turned in standbyautomatically.If you connected this unit to an “HDAVI Control” compatible TV with an HDMIcable, or connected this unit to a Q Link-compatible TV with a fully wired 21-pin Scart cable, this unit will be automatically set to standby mode when theTV is set to standby mode.• 86This unit turns off when the TVinput is switched.If connected with an HDAVI Control 4 compatible TV (VIERA) with the“Intelligent Auto Standby” setting activated on the TV, when switching the TVinput, the unit will be automatically turned to standby. For details please readthe operating instructions of the TV.• −General Issues Displays PageThe display is dim. Change “Unit’s Display” in the Setup menu.• 104“0:00” is flashing on the unit’sdisplay.Set the clock.• 15The displayed time of this unit isdifferent from the actual recordingtime or MP3 recording time.Times shown may disagree with actual times.BD-R -R -R DL +R +R DL The remaining capacity does not increaseeven if titles are deleted.Available space on a DVD-RW (DVD-Video format) or +RW disc increaseswhen you delete the last title (space may increase slightly when you deleteother titles).If you record or edit about 200 times or more, the remaining capacity of DVD-R, DVD-R DL, +R, and +R DL is reduced and then recording or editing maybe disabled (for the second layer on DVD-R DL and +R DL, this happens afterabout 60 times).While searching, the elapsed time may not be displayed accurately.•••••−−−−−Compared to the actual recordedtime, the elapsed time displayedis less.(Only when recording in NTSC)The displayed recording/play time is converted from the number of frames at29.97 frames (equal to 0.999 seconds) to one second. There will be a slightdifference between the time displayed and the actual elapsed time (e.g.,actual one-hour elapsed time may display as approximately 59 minutes 56seconds). This does not affect the recording.• −The clock does not display on theunit when switched to standby.Ensure “Power Save” is set to “Off”.• 107Available disc space display isshowing different from what wasusedAvailable disc space display may be different from actual. Varying may belarge especially when recorded in DR mode.• −Reference