78Receiving DocumentsYour machine is provided with both automatic and manual reception modes. The selection of either receptionmode is made with Fax Parameter No. 17 (RCV MODE).Automatic ReceptionYour machine will receive documents automatically if the Fax Parameter No. 17 (RECEIVE MODE) is setto ”Auto” (see page 39).Manual ReceptionYou may wish to receive documents manually if you use the telephone line in your office primarily as apersonal telephone and occasionally for your facsimile machine.To receive documents manually, change the Fax Parameter No. 17 (RECEIVE MODE) to ”Manual” (Seepage 39) and the following message will be shown on the display.To receive documents manuallyFAXMake sure that the FAX lamp is on.If not, press FAX to set the ”FAX Mode”.When the telephone rings, lift the handset (See Note). Ifyou hear a beep, the sound tells you that someone wantsto send a document.Remove any documents from the ADF.STARTPress 2 for ”NO”.Your machine starts receiving the document.Hang up the telephone.Your machine requires an external telephone connected to the TEL jack on the left side of themachine.040030000010400403000204004010001040040400110400401000204004040012040049900070400406005004004060003040040600040400406004904004060006Note:0400407001908–OCT–1998 15:00MANUAL RCV 00%SCAN FROM FLATBED?1:YES 2:NOON LINE * RCV *12345