169Sub-addressingADF scanningWhen documents are placed on the ADF, the LCD is asshown to the right.The document(s) is stored into memory with a file number.The machine starts to dial the telephone number of thestation and sends the document(s) with Sub-addressinginformation.Flatbed scanningWhen a book or a document is placed on the Platen Glass,the LCD is as shown to the right.Press 1 to select ”YES”. (Pressing 2 returns you to theprevious screen.)The document is stored into memory with a file number.Then the machine prompts whether you wish to storeanother page.To store another document into memory, press 1 to select”YES”. If you do not wish to store an additional document,press 2 to select ”NO”. (See Note 4)If ”YES” is selected, the LCD is as shown to the right.Press START to store the document. Repeat this stepuntil you have stored all the desired documents.If ”NO” is selected, the LCD is as shown to the right and themachine starts to dial the telephone number of the stationand sends the document(s) with Sub-addressinginformation.1. FLASHseparates the Sub-address from the Telephone number and is indicated by an ”s” in thedisplay.2. Manual Off-Hook or On-Hook Dialling cannot be used with the Sub-addressing Transmission.3. The Sub-address is not transmitted during Manual Redial Mode.4. If no action is taken within 60 seconds, the machine will delete the stored pages and return to the standbymode.0600500000106005060009#@multitude06005060010#@multitude Note:06005070002#@multitude060050700030600507000404003070034#@multitude* STORE * NO.001PAGES=01 01%* STORE * COMPLETEDTOTAL PAGES=05 25%SCAN FROM FLATBED?1:YES 2:NO* STORE * NO.001PAGES=01 01%SCAN ANOTHER PAGE?1:YES 2:NOSET ANOTHER PAGE ANDTHEN PRESS START* DIALLING * NO.00155512345a5b(1)(2)
