- 21 -PlaybackYou can share photos, videos and music stored inthe DLNA Certified media server [PC withWindows 7 installed, smartphone, recorders(DIGA), etc.] connected to your home network.≥ About support format of DLNA (> 37).Preparation1 Perform network connection (> 12) andnetwork settings (> 13) of this unit.2 Add the contents and folder to the libraries ofthe Windows Media ® Player or thesmartphone, etc.≥ Playlist of Windows Media ® Player can playback only the contents that are stored in thelibraries.≥ When connected to DIGA, register this unit toyour DIGA.≥ The list can be updated by pressing the redbutton on the remote control.5 Select the equipment and press [OK].6 Select the item to play and press [OK].≥ You may be able to use convenientfunctions depending on the content bypressing [OPTION].To exit from Home NetworkPress [HOME].Home Network featureBefore using the following features, be sure toconfigure the connected equipment on yourHome Network.Using Miracast TMYou can enjoy the content you are viewing on aMiracast-compatible smartphone, etc. on the bigscreen of your TV.≥ Compatible with AndroidTM devices, ver. 4.2and above and Miracast certified.For information on whether the smartphone,etc. supports Miracast, contact themanufacturer of the device.1 Press [MIRACAST].2 Operate the Miracast compatible device.≥ On the device, enable Miracast and selectthis unit* as the device to be connected.For details, refer to the instructionssupplied with the device.* The unit name will be displayed in the following;[BDT465] [BDT460] > DMP-BDT460/5[BDT365] [BDT364] [BDT363] [BDT361] [BDT360]> DMP-BDT360/1/3/4/5To exit from MiracastPress [HOME].Player Miracast compatibledevicePlaying back contents on theDLNA server1 Press [HOME].2 Select “Network”.3 Select “Home Network”.4 Select “DLNA Client”.≥ The connection method can be switched toWi-Fi Direct by pressing the green buttonon the remote control.Player Server