Panasonic DMP-BDT465 Operating Instructions Manual

Also see for DMP-BDT363: Basic operating instructions

Panasonic DMP-BDT465 Operating Instructions Manual Manual pdf 10 page image

- 10 -Connections and settingsConnections and settingsConnecting to a TVConnect the AC mains lead after making all connections.≥ Before making any connections, we recommend that you temporarily disconnect all the units from ACpower.≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p or 24p (4K) signal,please use HDMI cables 5.0 meters or less.≥ [BDT465] [BDT460] : Use HDMI AV OUT MAIN terminal.≥ This unit consumes a small amount of AC power (> 36) even when turned off in standby mode. Forthe purpose of energy conservation, the unit should be disconnected if you will not be using it forextended period of time.Connecting to an amplifier/receiver≥ [BDT465] [BDT460] : Use HDMI AV OUT MAIN terminal.≥ Set “Digital Audio Output” (> 27).≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connectedusing an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.HDMI INHDMI cable[BDT465][BDT460][BDT365][BDT364][BDT363][BDT361][BDT360]AC mains lead (supplied)To a household mainssocketPerform either one of the following connections in accordance with your amplifier/receiver inputterminal.HDMI AV OUTHDMI IN(ARC)HDMI OUT(ARC)HDMI INHDMI cable HDMI cableAmplifier/receiver[BDT465][BDT460][BDT365][BDT364][BDT363][BDT361][BDT360]≥ When connecting to a non-3D or 4K compatible amplifier/receiver, connect this unit to a TV, thenconnect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to5.1ch.