Panasonic CY-VMC7000U Operating Instructions Manual

Also see for CY-VMC7000U: Operating manual

Panasonic CY-VMC7000U Operating Instructions Manual Manual pdf 34 page image

37CY-VMC7000U28ENGLISH¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries.¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure yourhands and fingers.Caution : Do not disconnect the battery terminals of a car with trip or navigational computer since all usersettings stored in memory will be lost. Instead take extra care with installing the unit to prevent shorts.Caution : Please follow the laws and regulations of your state, province or country for installation of theunit.¡Disconnect the cable from the negative (–) batteryterminal (see caution below).¡Unit should be installed in a horizontal positionwith the front end up at a convenient angle, butnot more than 30°. less than 30°❏ Transportation bracket removalBe sure to remove the transportation brackets before use (installation).Use Binding-Head Screws (M5 x 6 mm) for installation.Be careful not to lose these Binding-Head Screws.Display UnitBinding-HeadScrews(M5 x 6 mm)Binding-HeadScrews(M5 x 6 mm)TransportationBracketTransportationBracketMounting the Display Unit❏ PrecautionsThis unit should be professionally installed. In case of difficulty, please consult with your nearest professional installer.1. This unit only operates in a 12-volt DC negative ground system.2. Follow the electrical connections carefully (a page 42 to 47). Failure to do so may result in damage to the unit.3. Connect the power lead after all other connections are made.4. Be sure to connect the battery lead (yellow) to the positive terminal (+) of the battery or fuse block (BAT) terminal.5. Insulate all exposed wires to prevent short circuiting.6. Secure all loose wires after installing the unit.7. Please carefully read the operating and installation instructions of the respective equipment before connecting it to thisunit.