Panasonic CY-VMC7000U Operating Instructions Manual

Also see for CY-VMC7000U: Operating manual

Panasonic CY-VMC7000U Operating Instructions Manual Manual pdf 18 page image

21CY-VMC7000U12ENGLISHNotes:¡Press [MENU] or [MODE] to return to the regular mode.¡The display returns to the previous one if there is no operation for 60 seconds, after changing to the rear monitorsetting menu.¡Picture and sound from the car navigation system connected to an RGB are not available at the rear monitor.¡Sound in the CD mode is not available at the rear monitor.21 Press and hold [MENU] for more than 2 seconds.Press [[] or []] to select an item.Press [ENTER] to set.3: Picture and sound come out. These are in thesame mode as the front seat monitor.: Picture and sound in the VTR1 mode alwayscome out.: Picture and sound in the VTR2 mode alwayscome out.VTR2VTR1AUTORear Monitor Setting MenuShift the transmission gear into the reverse position.The display shows a picture from the rear view camera.Notes:¡You can see a picture from the rear view camera even if the power of thedisplay unit is inactivated.¡You can a see picture from the rear view camera if you change the modeto the same one (VTR1 or VTR2) as the terminal to which the rear viewcamera was connected (VTR1-IN or VTR2-IN).Press [MODE] to change to the VTR1 or VTR2 mode.Select the same mode (VTR1 or VTR2) as the terminal that isconnected to a VCR or Camcorder (VTR1-IN or VTR2-IN).Rear View CameraCY-VMC7000UControl UnitVTR1-IN VTR2-IN(Example)CY-VMC7000UControl UnitVTR1-IN VTR2-INCamcorderVCR(Example)INTELLIGENT SYSTEMBS G-CODEPOWERRear SeatMonitorCY-VMC7000UControl UnitVIDEO-OUT(Example)