Panasonic CT-27G30CT Operating Instructions Manual

Also see for CT-27G30CT: Operating instructions

Panasonic CT-27G30CT Operating Instructions Manual Manual pdf 12 page image

Cable Power Button - The CABLE Powerbutton on the Remote Control has been designed tooperate selected brands of Cable Converter Boxes. Theproper Cable Converter Box infra-red code must beobtained prior to use. (Please refer to Programming theUniversal Remote for programming instructions.) TheTV/AUX/CABLE switch should be in the cable position.NOTE: Use the Channel UP and DOWN buttons on theRemote for selecting Cable Converter BoxChannels.Located On Remote ControlCABLEPOWERUse to select Cable BoxChannels after programmingInfra-red Code.PIP (Picture in Picture) Button -Thisfeature allows the viewer to monitor one channelprogram while watching another. The monitored source(PIP) can be a different channel or a different videosource (such as a VCR) when connected to the inputjacks.• The TV/AUX/CABLE Switch should be in the TVposition (LEFT) before operating PIP buttons.• S-Video connection will also operate the PIP feature(refer to OPTIONAL S-VIDEO VHS CONNECTIONsection).• When the Main Picture is in Video mode with nosignal, the PIP will not operate properly.PIP Operation1. Press the PIP button. The PIP frame will appear atthe position it was last displayed. The Main Picturechannel and PIP channel will display momentarily.Audio will be that of Main Picture.2. To select CHs for the Main Picture, use the RemoteControl Keyboard or Channel UP/DOWN buttons.To select CHs for the PIP frame use the RemoteControl PIP Channel UP/DOWN buttons.3. Press the PIP button again to cancel PICTURE INPICTURE feature.NOTE: For PIP Video source connection, refer to PIPAntenna and External Video connection section.PIP Channel Buttons - Pressthe(PIP)CH(CHANNEL) UP or DOWN button while the PIP frame isdisplayed to sequentially scan through Channels.Scan Channel DOWN Scan Channel Up(next lower) (next higher)PIP Swap Button - Press the SWAP button(when the PIP frame is displayed) to interchange what isbeing viewed on the Main Picture with that of the PIPframe.CH O2PIP VIDEO 1Audio will be that of the Main Picture.MainPicturewithSoundCH 2PIP CH 5r-1Main PictureChannel11----Picture inPictureChannelPicture inPictureFrame-12-