Panasonic CF-48 Series Reference Manual

Also see for Toughbook CF-48 Series: Reference manual Operating instructions Reference manual Service manual Reference manual

Panasonic CF-48 Series Reference Manual Manual pdf 9 page image

9Windows NTIf the security indicator ( ) is displayed, your password has been set.This password has been set in the Setup Utility and is not a Windows NT password.Windows 98 Windows 2000When the computer enters either the standby or hibernation mode by the closing of theLCD panel, it will resume when the LCD panel is opened. If the computer does notresume when the LCD panel is opened, press the power switch.After the display returns, the computer needs a short period of time to reinitialize.This takes about 30 seconds. Do not shut down or restart Windows, or entereither the standby or hibernation mode again during this time, as this may subse-quently cause Windows to operate abnormally.Do not install or remove peripherals while your computer is in the standby orhibernation mode; abnormal operation may result.When operation resumes, serial devices such as a mouse, modem or PC Cardsmay not function properly. In such cases, you will need to restart your computeror reinitialize the individual devices.Avoid the following until the power is completely turned off when turning off thecomputer by using the standby or hibernation functions, or resuming operationfrom the standby or hibernation.• Touch the keyboard (excluding password input), touch pad, or power switch.• Connect or disconnect the AC adaptor.• Close the display.Windows 98 Windows 2000Even when a password has been set in the Setup Utility, does not appearwhen the computer resumes from the standby or hibernation mode.(If you want to use the security function when using the standby or hibernationmode, use the Windows password as the following.Select [Start] - [Settings] - [Control Panel] - [Power Management]* - [Advanced],then add the check mark for [Prompt for password when computer goes offstandby].)*3 Windows 2000 : [Power Options]Press the power switchStandby/Hibernation FunctionsResuming OperationCAUTION