Panasonic CF-48 Series Reference Manual

Also see for Toughbook CF-48 Series: Reference manual Operating instructions Reference manual Service manual Reference manual

Panasonic CF-48 Series Reference Manual Manual pdf 59 page image

59Setup UtilityEnter the User Password or Supervisor Password. If you have forgotten it, contactPanasonic Technical Support.Restart the Setup Utility with the Supervisor Password.Restart the Setup Utility with the Supervisor Password.Restart the Setup Utility with the Supervisor Password.Press Ctrl + Alt + Del and select [Shut Down].After shutting down by pressing the power switch for more than four seconds,press the power switch to power on and open the application again.If the program no longer works normally, go to [Start] - [Settings] - [Control Panel]- [Add/Remove Programs] to delete the program. Then, reinstall the program.Computer hangsApplication Software[Enter Password] is dis-played[Advanced] menu cannot be registeredAll or some items in [Se-curity] menu can not beregisteredF9 does not workDealing with Problems (Advanced)Unable to connect to anetworkWindows cannot be shutdown or restartedWindows 2000When performing a copyoperation via a LAN cardwith a computer on thenetwork, an error mes-sage is displayed and thecopy operation failsThe sound is not heardThe computer producesa strange soundWhen using the computer as a network computer, some additional settings mayhave to be made depending on the usage conditions. We recommend asking yoursystem administrator or the person in charge of the network.If the standby or hibernation mode is entered, the computer may have to be re-started.Was an attempt made to shut down (or restart) Windows while the computer wasconnected to a network drive using a LAN?With the following procedure, shut down (or restart) Windows after disconnecting thenetwork drive.1 Select [My Computer] on the Desktop with the right button of the touch pad.2 Select [Disconnect Network Drive].3 Select all of the displayed network drives, then select [OK].The settings for the LAN card you are using may not be optimized. Confirm thiswith the following procedure.1 Double-click the Network Card you are using from [Network adapters] in [Con-trol Panel] - [System] - [Hardware] - [Device Manager]2 Select [Advanced], select [Store And Forward] from [Property], then set [En-abled] for [Value] if it is set to [Disabled](This item may be unavailable for some types of network cards.)Confirm that the computer on the network is operating properly and that the file isnot corrupt.NetworkTry changing the mute by pressing Fn + F4 or Fn + F6 .Has the Setup Utility been used to set [Speaker] to [Disable]?( page 47)If the computer has not been used for a long period of time, it may produce an un-usual sound at start up. The sound may continue for a short period of time, but if thecomputer starts up in a normal manner, then the problem is not serious. If, however,the computer fails to start up, contact Panasonic Technical Support.Sound