Panasonic CF-48 Series Reference Manual

Also see for Toughbook CF-48 Series: Reference manual Operating instructions Reference manual Service manual Reference manual

Panasonic CF-48 Series Reference Manual Manual pdf 35 page image

352 Connect the external display to your computer1 Power off your computer ( "Starting Up/Shutting Down")Do not shut down using the standby or hibernation function.3 Turn on the external display, then turn on your computerExternal Display PortExternal DisplayFor more detailed information, refer to the operation manual of theexternal display.NOTE4 Select your external displaySet your external display for [Monitor] in [Start] - [Settings] - [ControlPanel] - [Display] - [Settings] - [Advanced].When a monitor that does not conform to the Plug & Play standards isconnected, select [Change]* and make the monitor settings.* Windows 2000 : [Monitor] - [Properties] - [Driver] - [Update Driver]For more detailed information, refer to the operation manual of theexternal display.The characters on the external display may be blurred if the resolutionof the external display is set to 2048 x 1536. In this case, select aresolution that is lower than 2048 x 1536.When an external display is connected, the computer displays onboth the internal LCD and the external display after Windows startsup regardless of the [Display] setting in the Setup Utility.It is possible to change the setting to display only on the externaldisplay or only on the internal LCD with the Fn + F3 keys.NOTENOTEWindows 98 Windows 2000