Panasonic CF-48 Series Reference Manual

Also see for Toughbook CF-48 Series: Reference manual Operating instructions Reference manual Service manual Reference manual

Panasonic CF-48 Series Reference Manual Manual pdf 5 page image

5Use the touch pad to move the cursor on the display and perform normal computeroperations.Touch Pad (Advanced)Left ButtonRight ButtonWork SurfaceThe touch pad has been designed to work only when a finger is used. Therefore,do not use any implement on the touch pad.The double-tapping speed of the touch pad cannot be changed.NOTEorTwo quick taps, but on thesecond tap leaving yourfinger down (applyingpressure) and moving iton the work surface.While holding down thebutton, moving your fingeron the work surface.orFunction Touch Pad OperationMoving the CursorTapping/ClickingDouble-Tapping/Double-ClickingDraggingScrollScroll a document(The movements will differdepending on the applica-tion.)orMove the tip of your fingerlightly over the surface.When a check mark is added for [Locking Drags] *After the drag operation (above: left side), it is neces-sary to determine the destination (i.e., location of drop)by one tap. Under the condition no destination is se-lected, do not use the standby or hibernation function.Nothing is shown on the display, even after resumingfrom the standby or hibernation mode.In this case, the display will return after a tap or click ismade.* In [Start] - [Settings] - [Control Panel] - [Mouse] - [Touch]Basic Operation(To next page)tapping clickingdouble-tapping double-clickingBesides the above operations, operations such as Zoom and Pan are possible byallocating these functions to the buttons and/or pad. For more details, refer to [Help] in[Start] - [Settings] - [Control Panel] - [Mouse].