Panasonic CF-48 Series Reference Manual

Also see for Toughbook CF-48 Series: Reference manual Operating instructions Reference manual Service manual Reference manual

Panasonic CF-48 Series Reference Manual Manual pdf 8 page image

8Standby ModeorHibernation ModeThe computer should be set for standby or hibernation ( page 7).Press the power switch; at the “beep* 1” sound, release your finger.(After releasing your finger from thepower switch, do not touch the powerswitch until the power indicator goes offor blinks.)Standby/Hibernation FunctionsAt the “beep” sound, release your finger from the power switch. If you continue topress down on the switch and hold it for more than four seconds, the unit will emita second “beep” then power off. Data not previously saved will be lost.Windows 98 Windows 2000Even when [When I press the power button on my computer] is set to [Shut-down]* 2 with [Control Panel] - [Power Management]* 3, if the power switch ispressed, a beep will sound and the power will go off if the switch is pressed formore than four seconds, although the computer will not completely shut down.With the method below, you can shut down the computer by using the hiberna-tion function.• Fn + F10 ( page 3)• •Windows 2000In [Start] - [Shut Down], select [Hibernate].Windows 98 Windows 2000With the method below, you can shut down the computer by using the standbyfunction.• Fn + F7 ( page 3)• In [Start] - [Shut Down], select [Stand by].Shutting Down Using the Standby or Hibernation FunctionCAUTIONNOTE*1 When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the SetupUtility ( page 47) or by the key combination Fn + F4 , there will be no beep sound.*2 Windows 2000 : [Power Off]*3 Windows 2000 : [Power Options]