Panasonic CF-48 Series Reference Manual

Also see for Toughbook CF-48 Series: Reference manual Operating instructions Reference manual Service manual Reference manual

Panasonic CF-48 Series Reference Manual Manual pdf 53 page image

53Windows Security FunctionWindows NT® or Windows 2000 has a security function that differs from the securityfunction of the Setup Utility. For detailed information, refer to the Windows help.Set the password for secrecy and protection.Only an account for the Administrator is created the first time the computer isstarted. Create accounts for person or persons who are actually going to use acomputer.We recommend using an NTFS file system in order to use the Windows securityfunction.Enabling Power ConservationConfirm that Phoenix APM 2.0 for Windows NT® is installed. (If [APM 2.0 for NT] isdisplayed in [Control Panel], this means that the program is installed.) If the program isnot installed, be sure to install it. ( page 19)Windows NTWindows NTNOTETechnical InformationPrecautions When Using a CardBus Type LAN CardPrior to usage, optimize the LAN card settings by following the procedure given below.Failure to do so may result in an error message being displayed when performing acopy operation via the LAN card with a computer on the network.1 Double-click the Network Card you are using from [Network adapters] in [ControlPanel] - [System] - [Hardware] - [Device Manager]2 Select [Advanced], select [Store And Forward] from [Property], then set [Enabled] for[Value] if it is set to [Disabled](This item may be unavailable for some types of network cards.)Windows 2000Windows 2000When Adding New Software or Hardware ComponentsSome of the contents of Service Pack 6 (installed at the time of purchase) may beoverwritten. Therefore, after adding a new software or hardware component, be sureto install (UPDATE) Service Pack 6. (See the c:\sp6\readme.htm file.)In addition, if you install Service Pack 6, some files of Phoenix APM 2.0 for WindowsNT® and Phoenix Card Executive 2.0 for Windows NT® may be overwritten. There-fore, after installing Service Pack 6, also re-install Phoenix APM 2.0 for Windows NT®and Phoenix Card Executive 2.0 for Windows NT®.At times you may be prompted to copy Windows NT® files. Input [c:\winnt\i386] asthe copy source and select [OK].In [Start]-[Run], input [c:\sp6\sp6i386.exe] and select [OK]. Follow the on-screeninstructions.Windows NT