Panasonic CF-48 Series Reference Manual

Also see for Toughbook CF-48 Series: Reference manual Operating instructions Reference manual Service manual Reference manual

Panasonic CF-48 Series Reference Manual Manual pdf 3 page image

3Pressing this key combination adjusts the bright-ness of LCD. The brightness setting is stored inmemory separately under the condition the ACadaptor is connected and under the condition theAC adaptor is not connected.By pressing this key combination, you can selecteither an external display, LCD or simultaneous,even if an external display is not connected.( page 35)Pressing this key combination turns on/off audiofrom the internal speakers and headphone jack.Rebooting the computer, or powering off then on,restores the speaker setting of the Setup Utility.Pressing this key combination adjusts the volumeof the internal speakers and headphone jack.Pressing this key combination causes the currentscreen on the display to be saved to memory, andpowers off the computer. ( page 7)Pressing this key combination displays the remain-ing battery capacity on the screen. ( page 22)Pressing this key combination causes the currentscreen on the display to be saved to the hard disk,and powers off the computer. ( page 7)LCD brightness con-trol ( down)LCD brightness con-trol ( up)Display changeSpeakers on/off switchVolume control( down)Volume control ( up)Power off using thestandby functionRemaining capacity ofthe battery packPower off using the hi-bernation functionKeyKey CombinationsFn + F2Fn + F3Fn + F4Fn + F5Fn + F7Fn + F6Functions Popup WindowONOFFDownUpFn + F9Fn + F10Remainingcapacity (%)displayBattery pack isnot installed.Do not press the following key combinations repeatedly in (quick) succession.Do not press the following key combinations while using the touch pad (mouse) or other keys.CAUTIONNOTECAUTIONDisabling the speakers will also disable thewarning beep.This key combination cannot be used to adjustthe volume of the warning beep.Fn + F1* When [Disable] is set for [Fn+F7/Fn+F10 Key] with the Setup Utility, these key combinations become inoperable.**Windows 98Windows 2000