Panasonic AJ-SPX900e Operating Instructions Manual

Also see for AJ-SPX900E: Mechanical Parts List Operating instructions Operating instructions

Contents

Panasonic AJ-SPX900e Operating Instructions Manual Manual pdf 98 page image

987-3-2 Error CodesThe following error codes are displayed in the display window ifan error occurs in the camera:9. Battery Nearly EmptyDisplay windowindicationOne of the bars in the battery remaining indicatorstarts blinking.WARNING lamp Blinks once per second.Tally lamp Blinks once per second.Viewfinder The BATT LED blinks.Warning tone Beeps 4 times per second.Warningdescription The battery is about to run out.Recording/playback operation Continues to operate.Countermeasures Replace the battery as required.10. P2 Card Nearly FullDisplay windowindicationOne of the bars for remaining MEDIA capacitystarts blinking.WARNING lamp Blinks once per second while recordingcontinues.Tally lamp Blinks once per second while recordingcontinues.Viewfinder The P2 card remaining capacity indicator blinks.Warning tone Beeps once per second while recordingcontinues.WarningdescriptionThe total remaining capacity of all the P2 cards istwo minutes or less.Recording/playback operation Continues to operate.Countermeasures Replace the cards. If there is an empty card slot,insert a new card.Code No. DescriptionE-11 Video initialisation errorE-27 Recording control errorE-30 P2 card removal errorE-38 P2 streaming microcontroller errorE-3F Microprocessor error in the camera control circuit.E-6F Reference signal error.ᤨࠫ