10388-2-6 LCD MONITOR 8-2-7 GENLOCKThe ____ in the Adjustable Range column indicates the presetmode.Items/Data SavedAdjustableRange RemarksBRIGHTNESS –7:+0:+7Adjust the LCD monitor brightness.– C U F –COLOR LEVEL –7:+0:+7Adjust the LCD monitor chroma level.– C U F –CONTRAST –7:+0:+7Adjust the LCD monitor contrast.– C U F –BACKLIGHT HIGHNORMALSelect whether or not to set the LCD monitorbrightness to always high.HIGH: Set to always high.NORMAL : The brightness changesaccording to the BRIGHTNESSsetting.– C U F –SELF SHOOT NORMALMIRRORSelect whether or not to change the LCDmonitor to mirror image.NORMAL : Do not change to mirror image.MIRROR : Change to mirror image.– C U F –ASPECT CONV. LT.BOXSQUEEZESelect a screen ratio for images displayedon the LCD monitor.LT.BOX : Display images in the letter boxsize.SQEEZE : Display images in the squeeze size.This item is enabled only when ASPECTdescribed in [8-2-1 SYSTEM MODE] is setto16:9.– C U F –Items/Data SavedAdjustable Range RemarksGENLOCK INTEXT26P EXTSwitch the camera synchronising signal.INT: Synchronise with the internal referencesignal regardless of the referencesignal input to the GENLOCK INterminal.EXT: Synchronise with the reference signalinput to the GENLOCK IN terminal.26P EXT:Synchronizes to the signal input via the26-pin connector.– C U F EH PHASECOARSE–50:+00:+50Perform coarse phase adjustment forhorizontal hold when configuring a system.– – – – –H PHASE FINE –160:+000:+160Perform fine phase adjustment for horizontalhold when configuring a system.This adjustment simultaneously shifts the SCphase.– – – – –SC PHASECOARSE01:3Perform coarse SC PHASE adjustment whenGENLOCK is set.– – – – –SC PHASEFINE–75:+00:+75Perform fine SC PHASE adjustment whenGENLOCK is set.When adjusting GENLOCK, please adjust HPHASE first, and then adjust SC PHASE.– – – – –ᤨࠫ
