– 86 –Chapter 4 Shooting — Handling setting dataHow to restore the scene file or menu setting status to the factory settingsAll the scene files and menu settings of the camera can be collectively restored to the factory settings.1 Select [MENU INITIALIZE] in the main menu → [OTHER FUNCTIONS] and press the control stick (or dialbutton).2 Select [EXECUTE] and press the control stick (or dial button).[SYSTEM RESTART] indication appears on the confirmation screen.3 Select [YES] and press the control stick (or dial button).The camera is restarted and data are restored to the factory settings.Saving to an SD memory card and loading saved dataScene files and other setting values that you have set can be saved as a file, and up to 8 files can be saved on the SD memory card, and saved datacan be loaded.f For scene files, the current setting values are saved in the camera automatically, and you can write the saved data to an SD memory card. When theyare loaded from the SD memory card, the current setting values are overwritten as well as the data saved in the camera.f All scene files [F1:] to [F6:] are overwritten.Saving scene filesFig. 1 Fig. 21 Select [SAVE] in the main menu → [CARD FUNCTIONS] → [SCENE FILE]. (Fig. 1)2 Select a file number (1 to 8) and press the control stick (or dial button). (Fig. 2)The title entry screen and keyboard are displayed.3 Enter desired characters on the keyboard using the control stick (or dial button).4 Select [OK] on the keyboard and press the control stick (or dial button).A confirmation screen is displayed.5 Select [YES] and press the control stick (or dial button).The file is written with the entered title on the SD memory card, and the screen of Fig. 2 returns.Loading scene files1 Select [LOAD] in the main menu → [CARD FUNCTIONS] → [SCENE FILE].2 Select a file number (1 - 8) and press the control stick (or dial button).A confirmation screen is displayed.3 Select [YES] and press the control stick (or dial button).When loading is completed, [LOAD OK] is displayed.Saving and loading user filesSelect [SAVE] or [LOAD] in the main menu → [CARD FUNCTIONS] → [USER FILE]. The operations onward are the same as for scene files.
