Panasonic AG-HPX171EJ Operating Instructions Manual
ENGLISHShootingE-596 Press the MENU button four times to cancelthe menu mode.To load a file1) Perform steps 1 to 3, select READ in step 4and push the Operation lever.When reading is completed, READ OKappears.To title a file1) Perform steps 1 to 4.2) Push the Operation lever in the e or rdirection to select a character, then push it inthe q direction to move to the next character.(The next character can now be selected.)You can input any of the following characters:Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_-./You can erase all characters using theRESET button on the camera or the remotecontrol.Camera or Remote controlBARSCH1 SELECTRESET/TC SET RECCH2 SELECTAUDIOINT(L)INPUT1INPUT2SHUTTER SPEES SELECTINT(R)INPUT2INPUT1MIC POWER+48VONOFFINPUT2ONOFFLCDZEBRAEVF DTLOISWFMOSDCOUNTER RESET TITLEVOL +MULTI/P-IN-P REC A.DUBPLAY/REW FF/ZOOMDATE/TIME PHOTOSHOTSTART/STOP-COUNTER3) When all characters have been entered, pushthe Operation lever in the w direction at the leftend (or in q direction at the right end) of thecharacters. Then press the Operation lever .To reload a file from an SD memory card1) Perform steps 1 and 2.2) Push the Operation lever in the e or rdirection to move to TITLE RELOAD, displayYES and press it again.The file reloads.If WRITE NG FORMAT ERROR appears,format the SD memory card. (Page 31)If WRITE NG WRITE PROTECT appears,release the protected status of the SDmemory card.If WRITE NG CANNOT ACCESS appears,quit all other operations (such as playback)before proceeding.If WRITE NG ERROR appears, the SDmemory card may be defective. Replace it.•••••• |
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved