Menu
Panasonic AG-HPX171EJ Operating Instructions Manual
                                                                                                                                    |
E-58You can save up to four scene file settings or othersettings as files on an SD memory card, and youcan also load them from the card.The data in all the scene files, F1 to F6, isrewritten.Insert the SD memory card into the unit.(Page 31)If you have saved a scene file1 Set the unit’s POWER switch to ON. Select SCENE FILE on the setting menuCARD FUNCTIONS screen, select YES andpress the Operation lever. (or push it in theq direction)For all other settings, select USER FILE.For menu operations (Page 97)You can also use the menu buttons on theremote control. (Page 16)CARD FUNCTIONSPUSH MENU TO RETURNSCENE FILE ––––––––––––NORMAL––––––––MIRRORUSER FILELCD SETEVF SETSD CARD FORMATLCD BACKLIGHTSELF SHOOT3 Push the Operation lever in the w or qdirection to select a file number (1 to 4).SCENE FILE (SD CARD)PUSH MENU TO RETURNFILE SELECT 1––––––––NO FILENO FILENO FILENO FILE––––READFILE 3FILE 4WRITEFILE 1FILE 2TITLE RELOAD•••• Push the Operation lever in the e or rdirection to select WRITE and press itagain.SCENE FILE (SD CARD)PUSH MENU TO RETURNFILE SELECT 1––––YESNO FILENO FILENO FILENO FILE––––READFILE 3FILE 4WRITEFILE 1FILE 2TITLE RELOAD5 Push the Operation lever in the w directionto display the screen below, then selectYES and press the Operation lever again.In the following example, TITLE 1 is thefilename. (To change the filename, seepage 59.)SCENE FILE (SD CARD)PUSH MENU TO RETURNWRITE FILE 1YES ––– PUSH STILL+/– : PUSH q / gNOTITLE EDITTITLE 1SEL : PUSH t / yThe message shown below appears to indicatethat the change in scene file settings has beencompleted.NOW WRITING...WRITE OK•Saving scene files and other settings on SD memory cards |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved