Menu
Panasonic AG-HPX171EJ Operating Instructions Manual
                                                                                                                                    |
ENGLISHMenuE-103Item Displaymode Description of settingsMATRIX (Camera) Selects the MATRIX table suitable for the desired color expressionduring shooting.NORM1:Suitable for shooting in the open air or under a halogen lamp.NORM:Suitable for brighter colors than the NORM1 mode.FLUO:Suitable for shooting under fluorescent light indoors.CINE-LIKE:Suitable for cinema-like image.SKIN TONE DTL (Camera) Sets the skin tone details. Select ON to reduce the skin tone detailsand soften the skin tone.ON, OFFV DETAIL FREQ (Camera) Sets the vertical detail for shooting in 576i (480i) progressive mode.THIN: Makes the detail thin.MID: Makes the detail slightly thicker.THICK: Makes the detail thicker.When images were shot in the progressive mode in which the verticaldetail is set as “THIN” or “MID” and are played on a monitoringtelevision (50i (60i) interlace), you will see flickers caused on horizontallines and almost horizontal oblique lines. When playing back imagesin the progressive mode or when editing images or performing otherpostprocessing, images with a higher resolution will be obtained withthe THIN or MID setting than with the THICK setting.NAME EDIT (Camera) Edits the name of the selected scene file you have selected with thescene file dial.CAMERA SETUP screenItem Displaymode Description of settingsASPECT CONV (Camera) elects the aspect ratio of the image you record in 576i (480i) format.This item cannot be selected when the 1080i or 720P recording formatis used. (Page 44)SIDE CROP: Crops the right and left edges of the image.LETTER BOX: Adds black bands at the top and bottom of the image.SQUEEZE: Squeezes the image horizontally.SETUP(Only when set to59.94 Hz)(Camera) Switch the setup level of video signals in 480i format using a P2 card.0%:Setup is switched to 0% for both the camera output and the recording..5%A:Setup is switched to 7.5% for the camera output and 0% for therecording.SCENE FILE screen (continued)___indicates the factory setting. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved