Menu
Panasonic AG-HPX171EJ Operating Instructions Manual
                                                                                                                                    |
E-119ENGLISHReferencePlaybackCannot play even when Ipress the play button.Make sure the MCR lamp is on (press the mode button).No kind of playback operation can be performed unless this lampis on.• P66Mosaic-like noise appearswhen I cue or review atape.This noise is inherent to digital video technology.This is normal.• ——Images do not appear onthe television even thoughI have connected thecamera-recorder properly.Make sure the input selector on your television is set to videoinput.Read the television’s instructions carefully and select the correctvideo input connector for the camera-recorder.• ——Cannot hear any soundfrom the camera-recorder’s speaker.You may have turned down the camera-recorder’s volume controltoo far.Adjust the volume level using the PAGE/AUDIO MON/VAR button+.• P78Cannot perform hot swapplayback.This unit does not support hot swap playback.To replace one card with another during dubbing, stop thedubbing first, and upon completing the replacement, resume it.• P89OtherCannot read the data onthe SD memory card.Make sure the SD memory card is formatted correctly.If it is not, format the card in the unit.• P31The remote control doesnot work.The battery in the remote control may have run out.If the remote control fails to work even if it is operated close to theremote control sensor of the camera-recorder, it means that thebattery has run out. Replace it with new one.• P20Make sure the remote control setting is the same for the remotecontrol unit and the camera-recorder.If the REMOTE setting is different on the remote control and thecamera-recorder, the remote control will not work.• P20There is a rattling soundwhen the camera-recorderis tilted back and forth.There are some parts of the camera that make a rattling soundin the MCR mode or when the POWER switch is OFF. This isnormal.• ——A clicking sound is heardwhen the power is turnedon or when the MCRmode is switched to theCAM mode.This initialization operation is performed when the camera startsup.It occurs due to the construction of the camera and is notindicative of any trouble.• —— |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved