Panasonic AG-HMR10 Operating Instructions Manual

Also see for AVCCAM AG-HMR10: Specifications User guide Specification sheet Brochure & specs Manual

Contents

82Setup menu listItem Displaymode Description of settingsSYNCROSCANCAM Adjusts the synchro scan shutter speed used for shooting images on a TVscreen, etc.When or is pressed and held, the settings change at a faster rate.When [SYSTEM FREQ] is set to [59.9Hz]60P/60i:•1/60.0...1/250.0 (Factory default setting is 1/60.0)30P:•1/30.0…1/48.0…1/250.024P:•1/24.0…1/48.0…1/250.0When [SYSTEM FREQ] is set to [50Hz]50P/50i:•1/50.0...1/250.0 (Factory default setting is 1/50.0)25P:•1/25.0…1/48.0…1/250.0DETAIL LEVEL CAM Adjusts the level of the image outline correction (in the horizontal and verticaldirections).-7…0…+7V DETAILLEVELCAM Adjusts the level of outline correction in the vertical direction.-7…0…+7DETAILCORINGCAM Adjusts the level of noise reduction for the detail signal.-7…0…+7Set to – for a clearer image. The noise will increase slightly.Set to + to reduce noise.CHROMALEVELCAM Adjusts the chroma level.-7…0…+7CHROMAPHASECAM Makes fine adjustments to the chroma phase.-7…0…+7COLOR TEMP CAM Makes fine adjustments to the color temperature.-7…0…+7MASTER PED CAM Adjusts the master pedestal (black level of the image) that is used as the basisfor images.-15…0…+15A.IRIS LEVEL CAM Sets the desired auto iris level.-10…0…+10DRS CAM Sets the DRS (Dynamic Range Stretcher) function.The dynamic range can be expanded by compressing the level of the videosignals in high-brightness areas where overexposure occurs during normalshooting.OFF, 1, 2, 3The higher the setting, the higher the compression level of the high-brightness•areas.The higher the setting, the greater the noise in the darker areas.•indicates the factory default setting.When the [SYSTEM FREQ] (Page 92) setting in [OTHER FUNCTIONS] is changed, the [SYNCRO SCAN](Page 82), [REC FORMAT] (Page 84) and [HDMI OUT SEL] (Page 87) settings are changed to the factorydefault.CAMERA SETUP