Panasonic AG-HMR10 Operating Instructions Manual

Also see for AVCCAM AG-HMR10: Specifications User guide Specification sheet Brochure & specs Manual

Contents

26Press the [POWER] button for 2 seconds or longer.The POWER lamp (green) illuminates and the•power turns on.If you press the [POWER] button for 2 seconds•or longer when the power is on, the POWERlamp flashes, the power turns off, and then thelamp goes off.Also, the POWER lamp flashes in the followingcircumstances.Recording error has occurred•Camera cable is disconnected (when the AG-•HCK10G camera head (optional) is connected)Power-saving mode•In line with the [POWER SAVE] setting in the[OTHER FUNCTIONS] setup menu, the followingwill apply if no designated operations∗ areperformed for approximately 5 minutes duringrecording standby (when an SD Memory Cardhas been inserted).ON: The portable recorder turns offautomatically.OFF: Does not switch off the portable recorder.∗ For details on the designated operations, see[POWER SAVE] in the setup menu (Page 92).AUDIO MON/ADVREC/PAUSETurning the power on/off