Panasonic AG-HMR10 Operating Instructions Manual

Also see for AVCCAM AG-HMR10: Specifications User guide Specification sheet Brochure & specs Manual

Contents

Playback61Playback settings (PLAY SETUP)The playback format and method can be set.Setting the playback format(PB FORMAT)Set the format for playback.1 Press the [MENU] button.Using the setup menus (Page 29)2 Select [PLAY SETUP] → [PB FORMAT], andthen press the [ENTER] button or .3 Press to select the playback format,and then press the [ENTER] button.Available formats:When [SYSTEM FREQ] is set to [59.9Hz]1080/60i (30P), 1080/24P, 720/60P (30P),720/24PWhen [SYSTEM FREQ] is set to [50Hz]1080/50i (25P), 720/50P (25P)The initial setting is the format that was set•in [REC FORMAT] in the [RECORDINGSETUP] setup menu (REC mode).4 Press the [MENU] button to return to thethumbnail screen.Clip numbers will be displayed in black•where playback is possible, and in red whereplayback is not possible.Even if the playback format is changed,the format set in [REC FORMAT] in the[RECORDING SETUP] setup menu will berestored when the mode is changed to RECmode.Repeat playback (REPEAT PLAY)Use this setting to repeatedly play back allavailable clips.1 Press the [MENU] button.Using the setup menus (Page 29)2 Select [PLAY SETUP] → [REPEAT PLAY] →[ON].3 Press the [MENU] button to return to thethumbnail screen.is displayed on the LCD monitor screen.When the playback is operated, the playableclips are played back repeatedly.Repeat playback will continue until playback•is stopped.To turn the repeat playback setting off, select•[OFF] in step 2.