Panasonic AG-HMR10 Operating Instructions Manual

Also see for AVCCAM AG-HMR10: Specifications User guide Specification sheet Brochure & specs Manual

Contents

Displays77R■REC STOPPED.NOW WRITING.Video recording has been stopped. Data is nowbeing written onto the card.REPAIR CLIP?Do you want to repair clips now?REC WARNINGIRREGULAR FRM SIG.• Displayed when an abnormality is detected in the signal thatis input to the portable recorder when recording SDI input.Recording resumes when the input signal returns tonormal. “Resumption of recording” (warning display)can be canceled by pressing the [REC/PAUSE] button.S■SD CARD FORMAT?YES NODo you want to format the SD Memory Card now?Yes/NoSDI INPUT ERROR.(OTHER FORMAT)• Displayed when the format of the SDI input signal isdifferent from the recording format of the portable recorder.SET DATE AND TIMESet the clock.T■THE CLIP IS PROTECTED.PLEASE CANCEL PROTECTION.The clip is protected. Cancel the protection.THE RECORDING IS STOPPED(OVER THE LIMITATION)The recording will stop. (Continuous recording for 12 hours)THE TC MODE IS CHANGED TO "NDF"NDF is selected as the TC mode setting.(Displayed when [SYSTEM FREQ] is set to [59.9Hz])THIS BATTERY CANNOT BE USED.The battery currently inserted into the portablerecorder cannot be used.THIS CARD CANNOT RECORD IN VIDEOMODE.The card cannot be used for video recording.THUMBNAIL DATA ERROR IS DETECTED.An error has been detected in the thumbnail information.U■UNABLE TO FORMAT.The card cannot be formatted.W■WRITE PROTECTThe card is write-protected.Error displaysThe following messages are displayed when anerror occurs in the portable recorder or the SDMemory Card. If the problem is not solved byswitching the power off and back on again, eitherchange the card in accordance with the instructionsdisplayed, or consult the place of purchase.C■CANNOT RECORDDisplayed when an error has occurred during recording.R■REC WARNINGDisplayed when an error has occurred duringrecording. Start the recording again. If the messageappears again, consult the place of purchase.• Switch the power off if the message continues to appear.Try inserting a different SD Memory Card if themessage appears again after restarting recording.S■SYSTEM ERRORTURN POWER OFFDisplayed when an error has occurred in thesystem. Switch the power off and back on again.• If this error is displayed when accessing the SDMemory Card, such as when deleting a clip, theSD Memory Card may be damaged. Replace itwith a new SD Memory Card.• If this error is displayed when repairing theSD Memory Card, use the AVCCAM Restorercontent repair software. (Page 34)• When the AG-HCK10G camera head isconnected, displayed when the camera cableis removed with the power on. First turn off thepower, then remove the camera cable.When the camera head is connected■When the AG-HCK10G camera head (optional) isconnected and recording is in progress, displayed whenan abnormality is detected. Turn the power on again.FOCUS NGTURN POWER OFF (error in focus operation)PSD NGTURN POWER OFF (error in camera shaking detection)ZOOM NGTURN POWER OFF (error in zoom motor)