OHAUS RS Series Operator's Manual

Also see for RS Series: Quick start guide

OHAUS RS Series Operator's Manual Manual pdf 24 page image

RS Series Operator Manual184.9 Large SaleIf the weight of item to be weighed is more than the scale’s capacity, you may input its weight value in large sale modeThe following shows how to get into and operate in large sale mode.Procedure Description KeyOperationDisplayon 1st lineDisplayon 2nd lineDisplayon 3 rd lineDisplayon the bottom lineLitcursorStep1 Weighing mode 0.000 0.00 0.00 V1 ticketStep2 Recall PLU1 [1] 0.000 2.00 0.00 PLU 1Step3 Initiate large sale mode [MODE}+[DISC] 0.000 2.00 0.00 PLU 1 LSStep4 Input the weight value: 35.000kg [3][5][0][0][0] 35.000 2.00 70.00 PLU 1 LSStep5 Accumulate transaction [V1] 0.000 0.00 0.00 V1 p1 A 75.00------ Continue other transactions4.10 100g FunctionWhen setting 4xx is enabled this means 100g is enabled. Operation related 100g function is as follows:Procedure Description KeyoperationDisplayOn 1st lineDisplayon 2 nd lineDisplayon 3 rd lineDisplayon the bottom lineLitcursor------ In weighing mode, recall PLU3 1.000 2.00 2.00 PLU 3Step1 The weight unit of unit price changes to 100g [MODE}+[X] 1.000 0.20 2.00 PLU 3 100gStep2 The weight unit of unit price changes to kg [MODE}+[X] 1.000 2.00 2.00 PLU 3On ticket or label, weight unit of unit price is kg only, no 100g, even 100g can be shown.4.11 Show Data and Time☞ Sleep modeIf there is no key operation or weight change for about 3 minutes, the scale will go to sleep mode. At this time, the time anddate will show on the display. This mode will save power. When the weight changes or any key is pressed, the scale will goback to weighing mode immediately.☞ Show date/timeAt any time, you may toggle between displaying date and time, or back to weighing mode by following the operationbelow:Procedure Description KeyOperationDisplayon 1 st lineDisplayon 2 nd lineDisplayon 3 rd lineDisplayon the bottom lineLitcursorStep1 Weighing mode 0.000 0.00 0.00 V1 ticketStep2 Show date and time [Mode]+[Disc] 08:08:00 04-06-18Step3 Back to weighing mode [Mode]+[Disc] 0.000 0.00 0.00 V1 ticket4.12 BacklightScale is equipped with a backlight for the display. If ambient lighting conditions are not sufficient, the backlight can beswitched on to easily read the display.To activate backlight, press and hold [C] key until a long beep is heard and the backlight turns on.Use the same procedure to switch the backlight off, or simply turn the scale off.When the scale is powered by battery, and not used for 1 minute, the backlight will automatically switch off. When weightis placed on the platter or a key is pressed, the backlight will switch on again.When the power is AC power, the backlight will always be on.