RS Series Operator Manual94.3 Item Management LevelsThere are 1000 PLUs and 20 groups.4.4 Vendor Log in and Log outWhen vendor’s password exists, transactions can be accumulated only after this vendor logs in.The procedures to log in andlog out are as follows:Log in: e.g. vendor 1 logs inProcedure Description KeyoperationDisplayon 1 st lineDisplayon 2 nd lineDisplayon 3 rd lineDisplayon the bottom lineLitcursorStep1 Weighing mode 0.000 0.00 0.00 ticketStep2 Please input password of vendor 1 [V1] for 5 seconds PWStep3 Input the password [1][2][3] PW ***Step4 One beep means vendor 1has logged in [*] V1 log inStep5 Weighing mode, V1 means V1 haslogged inAbout 1 secondlater0.000 0.00 0.00 V1 ticketIf 4 vendors have logged in, the display is as follows:------- V1234 means 4 vendors have logged in 0.000 0.00 0.00 V1234 ticketLog out: i.e. vendor 1 logs outProcedure Description KeyoperationDisplayon 1 st lineDisplayon 2 nd lineDisplayon 3 rd lineDisplayon the bottom lineLitcursorStep1 V1 has logged in 0.000 0.00 0.00 V1234 ticketStep2 “V1 log out” shows about 2 seconds [V1] for 5 seconds V1 log outStep3 No V1 means V1 has logged out About 1 second later 0.000 0.00 0.00 V234 ticketWhen scale is turned off, all vendors will automatically be logged out.4.5 Recall PLU (item information) or Input Unit Price and Compute PriceThere are 3 ways to recall PLU or input unit price.☞ When automatically recalling PLU is enabled (Default status when you get scale)1) Press PLU # to recall PLU. E.g.: Recall PLU 21. Its tare is 0.020kg, unit price is 2.00$/kg and etc.Procedure Description Key operation Displayon 1 st lineDisplay on 2 ndlineDisplay on3 rd lineDisplayon the bottom lineLitcursorStep1 Weighing mode 0.000 0.00 0.00 V1 ticketStep2 Recall PLU 21 [2][1] -0.020 2.00 -0.04 PLU 21pt0.020kgNETStep3 Calculate total price Put on items 1.000 2.00 2.00 PLU 21pt0.020kgNET2) Input the unit price manuallyTo by weight type item, e.g. input a unit price 2.00$/kg。Procedure Description Key operation Display on1 st lineDisplay on 2 ndlineDisplay on3 rd lineDisplayon the bottom lineLitcursorStep1 Weighing mode 0.000 0.00 0.00 V1 ticketStep2 Input unit price [PLU][2][0][0] 0.000 2.00 0.ooStep3 Calculate total price Put on items 1.000 2.00 2.00To by count type item, e.g. input a unit price 2.00$/PCSProcedure Description KeyoperationDisplayon 1 st lineDisplayon 2 nd lineDisplayon 3 rd lineDisplayon the bottom lineLitcursorStep1 Weighing mode 0.000 0.00 0.00 V1 ticketGroup 20PLU1 PLUPLU1 ------Group 1PLU1 PLUPLU1 ------Scale------