OHAUS MB90 Instruction Manual

Also see for MB90: Quick start guide Service manual User guide Quick start guide Quick start guide

OHAUS MB90 Instruction Manual Manual pdf 53 page image

MB90 EN-5112.2 SpecificationsModel MB90Capacity 90Readability 0.01%/0.001gRepeatability (Std Dev) (g) 0.18% (3g sample)0.02% (10g sample)Moisture range 0.01% to 100%(0.01% to 1000% for regain mode)Heating Element HalogenDrying Programs Standard, FastTemp range 40°C - 200°CSwitch-off Criteria Timed, Auto, manualCalibration External calibration mass - 50gPower 100 V – 90 VAC 5A 50/60 Hz200 V – 240 VAC 2.5A 50/60 HzOperating temperature range 50° to 104°F / 10° to 40°CDisplay type 4.3’, QVGA, TFT touch screenDisplay results %moisture, %solids, %regain, time, temperature, weight, methodname, drying curve and statisticsPan size (mm) 90Interface RS232, USB host, USB device,Adjustable Feet and Level YesDimensions (WxHxD) (cm) 21x18x35Net wt. (kg) 5.23Shipping wt. (kg) 8.3513. COMPLIANCECompliance to the following standards is indicated by the corresponding mark on the product.Marking StandardThis product conforms to the EMC directive 2004/108/EC, the Low VoltageDirective 2006/95/EC. The complete Declaration of Conformity is availableonlineAS/NZS 61000.6.1, AS/NZS 61000.6.3CAN/CSA C22.2 No. 61010-1, UL Std No. 61010-1FCC NoteThis equipment has been tested and found to comply with the limits for a Class A digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference when the equipment is operated in acommercial environment. This equipment generates, uses, and can radiate radio frequencyenergy and, if not installed and used in accordance with the instruction manual, may causeharmful interference to radio communications. Operation of this equipment in a residentialarea is likely to cause harmful interference in which case the user will be required to correctthe interference at his own expense.

/ 54

Related manuals for OHAUS MB90