OHAUS MB90 Instruction Manual

Also see for MB90: Quick start guide Service manual User guide Quick start guide Quick start guide

OHAUS MB90 Instruction Manual Manual pdf 48 page image

EN-46 MB9011. CARE AND MAINTENANCEIn this section, you will learn how to keep your Moisture Analyzer in good condition and howto replace consumable parts.11.1 Cleaning Interior/Exterior ComponentsTo continue to obtain precise measurements, it is advisable to clean the interior componentsat regular intervals. Please note the following instructions for cleaning your instrument.WARNING: Electric Shock Hazard. Disconnect the equipmentfrom the power supply before cleaning.Open the cover and remove the pan handler,sample pan, draft shield, and heat shield fromthe instrument before cleaning.Use a lint-free cloth for cleaning.Clean the exterior of the instrument and thedrying compartment components with a mildcleaning agent. Although the housing isextremely rugged and resistant to solvents,never use abrasive cleaning agents orsolvents!Ensure that no liquid enters the interior of theinstrument.Replace the components after cleaning.Cleaning Temperature Sensor and ProtectiveGlassCheck the protective glass and the temperature sensorfor debris which could impede the operation. If the glassappears dirty, clean the surface facing the compartmentusing a commercial glass cleaner. If the sensor is dirty,clean using a mild cleaning agent.WARNING: Do not spray the glass cleanerdirectly on the glass. Instead, spray it on acloth and use the cloth to clean.Draft ShieldPan SupportHeat ShieldPan HandlerSample Pan